Sawing
MDF Panels are cut quickly and without shatters by carbide saws
Drilling
The instruments to drill plywood and particle board are also used to drill MDF
Milling
The MDF Structure allows to mill edges and surfaces under high treatment speeds. Thanks to its physical-mechanical properties MDF is optimal material for creating beautiful and unusual elements in furniture design.
Gluing
To glue the MDF same gluing substances are used as for gluing natural wood
Sanding
When sanding we recommend to use sanding tapes with 100 grit depending on the type of product to be produced and further treatment technology.
Lacquering and painting
These treatment technologies demand individual selection of treatment means depending on the type of product to be produced and terms of its further usage.
Peg
To put the glue the peg hole should 0.2 mm wider than the peg itself.
Fastening
The holes for screws should be drilled beforehand. The diameters of the hole and crosscut of the screw should be equal.
It is necessary to choose the correct glue for MDF covering depending on the covering technology. The smooth surface of the MDF itself makes it the ideal material for covering.
|